JBL RALLYBAR XL
each
JBL RALLYBAR XL Unique Dynamic LED Lights - Image

Unique Dynamic LED Lights

Lights, color, party! Transform your off-road journey into a rock concert. Pressing the light controls on the bottom panel will Sync your music to dynamic lights patterns

JBL RALLYBAR XL 300Wrms Class-D Amplifier Built-in - Image

300Wrms Class-D Amplifier Built-in

The 300Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Pro Sound when you take the wheel or helm.

Features

JBL RALLYBAR XL IP66 Rated Water and dust Resistant - Image

IP66 Rated Water and dust Resistant

IP66 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.

JBL RALLYBAR XL Support Broadcast Mode - Image

Support Broadcast Mode

Broadcast Mode allows RALLYBAR XL connect to multiple RALLYBAR XL or RALLYBAR XL family products (RALLYBAR, RALLYBAR S and RALLYBAR XL), allowing each soundbar to play the same audio source.

JBL RALLYBAR XL Support  Party Mode - Image

Support Party Mode

Party Mode provides simultaneous connection of up to two Bluetooth® devices—while playing music from one device at a time.

JBL RALLYBAR XL JBL Pro  Sound - Image

JBL Pro Sound

With HI-RESOLUTION Audio on wired audio sources, JBL Original Pro sound tuning, and DSP delivers extraordinary sound performance.

JBL RALLYBAR XL Innovative Mounting Kits Design - Image

Innovative Mounting Kits Design

The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.

JBL RALLYBAR XL Music Remote Control by JBL Click - Image

Music Remote Control by JBL Click

When user’s smartphone connected to the JBL RALLYBAR XL and a JBL Click Bluetooth controller (sold separately on JBL Website), you can use the JBL Click to control the music from your smartphone including “play/pause”, “next track”,” volume up/down”.

JBL RALLYBAR XL Support Bluetooth®, USB Disk and 3.5mm Auxiliary Input Audio Source Play - Image

Support Bluetooth®, USB Disk and 3.5mm Auxiliary Input Audio Source Play

RALLYBAR XL can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth®> AUX-IN audio source. Higher priority source can break-in Lower priority audio source.

JBL RALLYBAR XL Variable AUX-OUT - Image

Variable AUX-OUT

3.5mm auxiliary output (2V) can connect with external powered speakers and subwoofers, which can have changes of volume down/volume up/ play or pause according to Soundbar’s adjustment. The Line output is covered by a waterproof connector.

JBL RALLYBAR XL 3 Different Gain Settings - Image

3 Different Gain Settings

RALLYBAR XL Offers 3 different Gain settings when connected by Aux-in audio:2V, 4V, and 6V.

Video Gallery

Specs & Downloads

Item#: JBLPWSRALLYBARXL

EAN: 6925281973024

General Specifications

Transducers
8x 2.75”(70mm) woofers, 2x 1”(25mm) Tweeters, 4 x 7.2"(182.8mm) x3"(76.2mm) Racetrack Passive Radiators
Output Power
300WRMS, 600W PEAK (IEC60268)
THD at Rated RMS Power
< 1%
Voltage Range: 9.6 - 16VDC
Quiescent Current Draw
< 0.9A
Maximum Current Draw
40A
Frequency response
45Hz-40kHz
Signal-to-noise Ratio
> 80 dB
Cable type
10 AWG
Cable length
12 Feet (3.66m)
Bluetooth® Version
5.3
Bluetooth® profile
A2DP V1.3, AVRCP V1.6
Bluetooth® transmitter frequency range
2400 MHz – 2483.5 MHz
Bluetooth® transmitter power
≤ 15 dBm (EIRP)
Aux-In
2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
Aux-Out
2 Vrms (3.5 mm connector)
USB format
FAT16, FAT32
Soundbar Dimension (L x W x H)
35-11/32" x 5" x 4-5/8" (897.5 x 126.7 x 118mm)
Soundbar Weight
20.83 lbs (9.45 kg)
Packaging dimensions (W x H x D)
38.2" x 9" x 7.6" (971 x 229 x 193mm)
Gross weight
27.5 lbs (12.52 kg)
1x Soundbar
2x Security cables
1x Small Wrench
1x L-Small Allen wrench
1x T-handle hex wrench
2x Straps with Velcro
1x G-Clamp
1x Keychain
1x 12ft (3.66m) power/ground wire harness
2x Rubber top covers
2x Mount cleats
2x Short M8 screws
2x Short M5 screws
2x Long M5 screws
2x M5 screw nuts
4x Flat washers
2x C-Clamps (2”)
2x C-Clamps (1.75”)
2x Thick rubber strips (for 1.5” pole)
2x Thin rubber strips (for 2” & 1.75” pole)
1x Quick start guide
1x Safety sheet & warranty card

Reviews

Customer Reviews

Support

Register your JBL product

Do you own this product? Register it here in case you need to claim warranty

Register Now

Can't find what you're looking for?

Are you looking for product support, documentation, how-tos or older products?

JBL Support